Drum Motor & Idler Dimensions
Bracket Dimensions
Optional Cable Type Dimensions
Drum Motor Specifications
Cross Sectional Diagram
Parts Description

Dimensions (in inches)

Drum Motor
TM215A40

Drum Motor
TM215B40

Idler
KT215A40

Idler
KT215B40

Standard face widths (L) in inches for the TM215A40 and KT215A40: 16.73*   17.72*   19.69   21.65   23.62   25.59   27.56   29.53   31.50   33.46   35.43   37.40   39.38 

Standard face widths (L) in inches for the TM215B40 and KT215B40: 19.69*   21.65   23.62   25.59   27.56   29.53   31.50   33.46   35.43   37.40   39.38 

*This face width is not available in all horsepower.

back to top

Bracket AB 40

Optional Cable Type

Note: When Optional Cable Type is selected, the minimum face width (L) increased by 1.969 inches.

back to top

Specifications

Type	HP	Belt speed in feet per minute (ft/min) Belt pull measured in pounds (lbs.)														Minimum length (L) in inches		Weight in pounds (lbs.) at L = 19.69 inches
																Design A	Design B
TM 215 - 255	5.50	1369	1128	921	831	666	590	472	406	364	340	312	287	260	(ft/min)	19.69	21.65	161.10
		124	149	182	202	252	284	355	413	461	494	538	630	690	(belt pull)
TM 215 - 44	4.00	685	565	461	416	333	295	236	203	182	170	156	*144	*130	(ft/min)	19.69	21.65	161.10
		180	219	268	297	371	418	523	608	679	726	792	858	950	(belt pull)
		*120	*111	*102	*92	(ft/min)
		1029	1113	1211	1343	(belt pull)
TM 215 - 43	3.00	685	565	487	402	328	295	236	210	182	168	156	144	130	(ft/min)	16.73	19.69	154.50
		135	164	190	231	282	314	392	440	543	552	634	643	713	(belt pull)
		120	111	*102	*92	(ft/min)
		769	834	907	1006	(belt pull)
TM 215 - 63	3.00	451	371	321	265	215	194	156	137	120	111	94	85	80	(ft/min)	19.69	21.65	161.10
		206	249	288	350	430	479	594	677	820	834	980	1089	1154	(belt pull)
		73	66	*61	(ft/min)
		1265	1400	1514	(belt pull)
TM 215 - 42	2.00	685	565	487	402	328	295	236	210	184	161	144	130	120	(ft/min)	16.73	19.69	150.10
		90	109	127	154	188	209	261	294	335	384	428	475	512	(belt pull)
		111	102	92	(ft/min)
		556	608	670	(belt pull)
TM 215 - 62	2.00	451	371	321	265	215	194	156	137	120	111	94	85	80	(ft/min)	19.69	21.65	161.10
		137	166	192	233	287	319	396	451	540	556	653	726	769	(belt pull)
		73	66	*61	(ft/min)
		843	933	1009	(belt pull)
TM 215 - 415	1.50	487	402	328	295	236	210	184	161	139	130	120	111	102	(ft/min)	16.73	19.69	145.70
		95	115	141	157	196	220	251	288	332	356	384	417	456	(belt pull)
		92	(ft/min)
		503	(belt pull)
TM 215 - 615	1.50	321	265	215	194	156	137	120	113	111	94	85	80	73	(ft/min)	16.73	19.69	154.50
		144	175	215	239	297	338	384	408	417	490	544	576	632	(belt pull)
		66	61	(ft/min)
		700	754	(belt pull)
TM 215 - 815	1.50	236	194	158	142	113	102	90	78	66	61	59	54	50	(ft/min)	19.69	21.65	161.10
		164	199	243	272	340	380	430	495	584	629	654	710	778	(belt pull)
		45	(ft/min)
		860	(belt pull)
TM 215 - 61	1.00	321	265	215	194	156	137	120	113	92	85	80	73	66	(ft/min)	16.73	19.69	150.10
		96	117	144	159	198	225	256	272	335	363	384	421	467	(belt pull)
		61	(ft/min)
		503	(belt pull)
TM 215 - 81	1.00	236	194	158	142	113	102	90	78	66	61	59	54	50	(ft/min)	16.73	19.69	154.50
		131	159	195	218	272	304	344	396	467	503	523	568	622	(belt pull)
		45	(ft/min)
		688	(belt pull)
TM 215 - 675	0.75	321	265	215	194	156	137	120	113	92	85	80	73	66	(ft/min)	16.73	19.69	145.70
		72	87	108	120	148	169	192	204	251	272	288	316	350	(belt pull)
		61	(ft/min)
		377	(belt pull)
TM 215 - 875	0.75	236	194	158	142	113	102	90	78	66	61	59	54	50	(ft/min)	16.73	19.69	150.10
		98	120	146	163	204	228	258	297	350	377	392	426	467	(belt pull)
		45	(ft/min)
		516	(belt pull)
TM 215 - 1275	0.75	151	125	102	92	73	66	57	50	43	40	38	35	33	(ft/min)	16.73	19.69	150.10
		153	185	228	252	317	350	408	467	545	576	612	654	701	(belt pull)
		28	(ft/min)
		816	(belt pull)
TM 215 - 805	0.50	236	194	158	142	113	102	90	78	66	61	59	54	50	(ft/min)	16.73	19.69	145.70
		65	80	98	109	136	152	172	198	233	251	261	284	311	(belt pull)
		45	(ft/min)
		344	(belt pull)
TM 215 - 1205	0.50	151	125	102	92	73	60	57	50	43	40	38	35	33	(ft/min)	16.73	19.69	154.50
		102	123	152	168	211	233	272	311	363	384	408	436	467	(belt pull)
		28	(ft/min)
		544	(belt pull)
* Please consult the Van der Graaf technical department for use of these speeds. - Other belt speeds and face widths are available. - The total weight of the unit increases by 2.52 pounds per inch above 19.69 inches. - When the drive is supplied with lagging, the covered face width is reduced by 1.18 inches. - Belt speed is measured on the center of the unit without lagging. - Listed belt speeds are under full load conditions and may be higher under no load conditions. - When an electromagnetic brake is required, the minimum face width is increased by 3.94 inches. NOTE: TM215 type drum motors are available in all standard voltages and are electrically reversible.

back to top

Cross Sectional Diagram & Parts Description

Position Number	Part Description	Position Number	Part Description
1	Shell	33	Socket Head Cap Screw
2A	End Flange	34	Filler Plug
2B	End Flange	35	Washer
3	Gear Housing	36	Ball Bearing
4	Motor Flange	36V	Cylindrical Bearing
6	Shaft End	37	Ball Bearing
7	Hollow Shaft	38	Ball Bearing
8	External Gear	39	Needle Bearing
9/10	Pinion with Bushing	40	Shim
11	Gear	41	Locking Disc
12	Distance Ring	42	Snap Ring
13	Stator	43	Snap Ring
14	Rotor	44	Snap Ring
15	Socket Head Cap Screw	45A	Bearing Race
16	Cable Passage	45B	Bearing Race
18	Gasket	45DS	Double Seal Adaptor
20	Terminal Board	46	Oil Seal
23	Fillister Head Machine Screw	50	Seal
24	Fillister Head Machine Screw	51	Junction Box
27	Set Screw	52	Junction Box Cover
28	Set Screw	53	Plug
29	Key	54	Key
31	Socket Head Cap Screw	55	Backstop Bearing
32	Washer Copper	57	Name Plate

back to top


This site is designed and built by Van der Graaf © 2001. All rights reserved.